Mark II Garden Shed Alarm

The MD194 Mark II Property/Garden Shed Alarm is easy to install and can be used in a number of locations including Garden Sheds, Garages, Homes or office premises. This alarm is useful when one or more person requires access to a property as a communal code can be set.

A simple and very effective alarm system for doors or windows. The alarm will set off (following a short entry delay) when the contact is broken or if Shock or Vibration is detected (if force is detected via a door or window). This enables a person to know if an unlocked door is opened, for example a cupboard, fire exit or rear entrance

The MD194 Mark II Property/Garden Shed Alarm combines a variety of effective features

- a simple magnetic read switch that lets the alarm control panel know if a door or window is open or shut
- a sensitivity controlled Vibration or Shock sensor
- a keypad for arming and disarming the alarm.

If the alarm is triggered, a 130dB alert is sounded to deter the intruder and notify people nearby and will continue to sound for 15 seconds before re-setting. If the door is opened again then the alarm will re-sound.

This alarm is easy to install and is operated by batteries thus removing the need for wires and mains power. The keypad is fully programmable and easily reset if needed and the alarm gives delay time for entry and exit of the property.

Simple to install and extremely loud
No wiring required. Vibration Sensor may be set to High or Low sensitivity
This battery operated door alarm is installed in seconds
Programmable Key Pad
Piercing 130dB alarm when magnetic contact is broken or Vibration is detected
Entry delay of 10 seconds / Exit time delay of 20 seconds.
Battery Low Indicator. (4 x AAA batteries supplied)
Magnetic contact can be placed left or right as desired.
Unit Dimensions: 80mm x 55mm x 20 mm
Magnetic sensor dimensions: 42mm x 10 mm x 10 mm
Once triggered, re-arms the alarm sound after 15 seconds